Stay informed about the latest developments in cabinet manufacturing, IP rating standards, outdoor enclosure technology, and industrial cabinet solutions.
Official statistics on solar deployment indicate that as of the end of May 2025, the UK had a total of 18.9 GW of solar capacity across 1,803,000 installations. At least 43% of capacity (7,710 MW) came from ground-mounted or standalone solar installations, including the two operational solar farms accredited on Contracts for Difference (CfD).
The UK has entered a new era for solar power with nearly 3,500 solar farms in the planning system, new figures show. Sharp falls in the cost of solar panels over the past decade and rapid increases in the efficiency with which they can convert sunlight to power solar mean it is now the cheapest way to produce electricity in the UK.
The UK government has published a solar roadmap setting out the steps it will take to secure 47 GW deployed capacity by 2030. Image: Nick Fewing, Unsplash The UK government has published a new “Solar Roadmap” policy paper setting out how it plans to achieve 45-47 GW of deployed solar capacity by 2030, from nearly 19 GW as of May 2025.
In 2023, 196,782 new solar projects were added, marking the second-highest annual total for new installations, following the 208,586 installations in 2011. The UK government set an ambitious goal of achieving 45GW-47GW solar generation capacity by 2030, which means the UK needs to triple its solar capacity over the next decade.
Battery storage costs have evolved rapidly over the past several years, necessitating an update to storage cost projections used in long-term planning models and other activities. This work documents the development of these projections, which are based on recent publications of storage costs.
The projections are developed from an analysis of recent publications that include utility-scale storage costs. The suite of publications demonstrates wide variation in projected cost reductions for battery storage over time.
Battery cost projections for 4-hour lithium-ion systems, with values relative to 2024. The high, mid, and low cost projections developed in this work are shown as bold lines. Published projections are shown as gray lines. Figure values are included in the Appendix.
By definition, the projections follow the same trajectories as the normalized cost values. Storage costs are $147/kWh, $234/kWh, and $339/kWh in 2035 and $108/kWh, $178/kWh, and $307/kWh in 2050. Costs for each year and each trajectory are included in the Appendix, including costs for years after 2050. Figure 4.
GIGABYTE's WINDFORCE 600W cooling system features patented Triangle Cool technology for superior cooling performance than traditional fin modules, up to 35%. This results in an unprecedented cool and quiet gaming experience.
GE Renewable Energy’s Haliade-X, one of the most powerful wind turbines in the world, is cooled by a Heatex custom-made closed-loop cooling system. Read Case Study CSIC HZ Windpower’s 10MW H210-10.0 turbine is now in full serial production and operating outside the coast of Shandong in China. Read Case Study
The heat generated by energy conversion and solar radiation needs to dissipate to ensure the life expectancy of the components inside the nacelle. Heatex develops complete and customized wind turbine cooling systems. Customized solutions with proven performance for all types of turbines.
Closed loop solutions for efficient and reliable cooling of sensitive electronic equipment. GE Renewable Energy’s Haliade-X, one of the most powerful wind turbines in the world, is cooled by a Heatex custom-made closed-loop cooling system. Read Case Study
Coordinated control structure of wind power and energy storage. Secondly, the controller parameters of energy storage are evaluated according to the frequency regulation requirements of the system. Finally, the evaluation parameters are sent into the additional controllers to provide reliable frequency support.
Based on the induction factor received from the centralized control system, the turbines capture the kinetic energy from the wind and convert it into electrical energy, where the wake efect impacts the downstream wind turbines by reducing wind speed and generating additional turbulence.
At the same time, the coordinated control problem of multiple voltage and reactive power resources was fully considered. By establishing an optimal voltage control model, precise control of the power station voltage was achieved, significantly improving the coordinated control effect of photovoltaic energy storage power stations.
In order to improve the stability of the wind power and energy storage system, the ESSs adopts the control strategy combining V/f and PQ, which can not only ensure the response to the reference value allocated to the upper layer of ESSs, but also improve the stability of the black-start system.
